Tips To Handle Common Emergency Plumbing Repairs

Tips To Handle Common Emergency Plumbing RepairsA plumbing emergency can strike at any time. However, this does not mean that you need to call the local emergency plumbing company every time. Here is a list of the most common plumbing emergencies as well as some repairs that you can apply on your own. If you are not feeling confident to do the repairs on your own or if the steps listed below do not work for you, give a call to your local plumber for the right solution for the plumbing emergency.

Leaky Faucets

One of the most common emergency plumbing repairs in a home is a leaky kitchen or bathroom faucet. There are many different types of faucets and you need to know the exact type in order to repair it.

The valve of a compression faucet consists of two different levers and these levers rise up when you turn on the faucet. On the other hand, the handles in a reverse compression faucet lower when you turn it on. A ball or cartridge faucet consists of one lever for hot and another for cold water.

For repairing a leaking ball or cartridge faucet, you will need to turn off the water supply and remove the faucet handle using an Allen wrench.

Kitchen Drain Blockage

The kitchen drains are specifically designed to get rid of dirty water from your dishwasher, kitchen sink as well as the shredded food scraps produced by the garbage disposal. If too big objects fall in, they might clog up your kitchen drain. Here is what you need to do to unclog blocked kitchen drains:

You should first use a plunger to unblock the drain. For using the plunger, you need to remove the strainer and put the plunger over the opening. Open up the faucet to fill the kitchen sink with water but make sure it only covers the plunger’s cup. Start moving the plunger up and down for developing suction.

Keep repeating the action until the object that is obstructing the drain is lifted up. Once it is lifted, the water will quickly drain from the sink. In case the plunger does not work, you may have to use a kitchen plumber’s snake.

If you are unable to unclog the drain even after using a plumber’s snake as well as a plunger, it means that the obstruction is lodged deep inside the drain. It is now time to give a call to your emergency plumber before your kitchen floor floods due to the sewer backing up. If you are based in Chertsey, Act Fast Solutions are emergency plumbers in Chertsey who cannot be matched in terms of response speed and professionalism.

Clogged Toilet

Do not make the mistake of flushing down big objects down your toilet train as it’s not specifically designed for bigger objects. You will need emergency plumbing repair for clogged toilets. Here is what you need to do to unclog a toilet on your own:

In case the toilet bowl is full, you will need to empty half of the contents with the help of a handled container. However, you will need to fill up the bowl until it is half full in case it is empty.

Take a toilet plunger and keep moving it up and down after placing it on the drain. Repeat the motion until all the water is drained out. You will need to use a plumbing auger in case the plunger does not work even after repeated tries. Keep pushing the plumbing auger in the drain until it hits the obstruction. Slowly rotate the auger for breaking up the obstruction.

You will need to give a call to your emergency plumber in case the plumbing auger also turns out to be ineffective. It means that the obstruction is lodged much deeper.

TIP: Do not use a toilet plunger in your kitchen and vice-versa as it can be a potential health hazard. A toilet plunger has the shape of a distorted ball that comes with a big opening at the bottom whereas a kitchen plunger has the shape of a ball that has been cut in half.

Water Heater Problems

If you have a storage water heater, it heats up the water taken from the water supply line with the help of electricity or gas. The hot water is kept in the storage tank at a pre-set temperature until you turn on the faucet when you need hot water. If you do not get water after turning on the tap, it means there is a problem with the water heater.

If there is a problem with the thermostat or the relief valves in the water heater, it may lead to increased internal heat and pressure which might cause the heater to explode. Therefore, when you are examining and working with a faulty water heater, you need to be extremely cautious. Here is what you need to do to deal with a faulty water heater:

If you are not getting hot water, it may be due to a problem with the water heater or the faucet. To check the source of the problem, find out if you are able to get hot water from other faucets. In case the faucet is the source of the problem, you need to check for a leaking or broken pipe.

If the source is the water heater, make sure it is functioning. You can check it by lightly touching the water heater and if it is hot, it means that your heater is functioning properly. If you are using a gas water heater, check the lit pilot lights. Check the manual of your gas water heater for instructions on how to lit back on the pilot lights. If you are using an electric water heater, you need to check the circuit breaker or fuse for any issues.